8. Push the grey lock lever toward the back of the printer until it stops.

9.Lift out the image drum and put it on a smooth, flat surface. Be sure to protect the drum from exposure to light either by placing it in the light shield bag supplied with the printer, or by placing a sheet of paper over it.

10.Use the lens cleaner supplied in the new toner kit to clean the LED array.

11.Locate the clear plastic film inside the front of the printer, then fold the lens cleaner over and use it to wipe any paper dust off the plastic film.

Film

12. Replace the image drum and close the cover.

Chapter 8: Maintenance

E–45

Page 53
Image 53
ALFA 20DX manual Maintenance