Manual Feed: Envelopes
Important!
•Use rear paper exit to avoid curling
•Do not use
Setting up to Print an Envelope
1.In your software program:
a.Enter the printer setup menu.
b.Select Manual Feed.
c.Select the envelope size.
d.Select landscape orientation.
2.Lower the rear paper exit tray and pull out the rear exit extender.
3. Lower the Front Feeder.
4. Flip out the manual feed tray, then pivot out the extender.
5. Adjust the paper width guides.
6.Insert the envelope with return address on lower left side and flap under- neath.
Return Address
7.Send the print command from your software.
8.When prompted to, press the FORM FEED button on the printer control panel.
The printed envelope will exit at the rear.
Chapter 4: The Front Feeder |
