O P E R A T I O N. . Options Window ..
.
To return to autosync for RGB again select RGB for Video Input. Input video Autosync is restored.
C R E A T I N G A N E W T I M I N G E N T R Y
If there is no entry in the timing list that matches a specific signal, a new one can be created. Find an entry in the list that is very close to the required parameters. Load the entry, modify it, and then save the new entry to the user defined timing list. There are over 100 available user entries.
Use the following procedure to create a new (user defined) entry in the timing list:
•Click the Edit button in the Input Timing section of the Input Timing page.
•Enter new timing parameters into each of the timing parameter boxes.
•Scroll to an empty timing list number above #100 in the Timing List entry box.
•Click the SAVE button.
A dialog box will open allowing you to name the new entry.
•Enter a name for the new timing entry and click OK.
The name can be up to 23 characters in length and can contain upper and lower and numeric characters. Avoid the use of a space or the / or \ characters.
| DGy Model 201x User’s Guide | 51 |
