RGB Spectrum DGy 201x manual 7Streaming Commands

C O M M A N D L I N E I N T E R F A C

.E

		.
		Commands
		. . .
STREAMING	The table below lists DGy 201x streaming commands.
. . . . . . . . .
COMMANDS
Table 6-7Streaming Commands
Command	Arguments	Description
StreamFragmentSTATus	(none)	Returns the current state of multicast streaming by
		displaying either ON or OFF for both the
		STREAMIN and STREAMOUT functions.
STREAMIN	(none)	Initiates the incoming multicast stream to be
		received, decoded, and viewed on the client DGy
		201x decoder. To begin subscribing to a multicast
		stream, first set the STREAMINADDR and
		STREAMINPORT.
STREAMINADDR	[ddd.ddd.ddd.ddd]	Sets or displays the incoming multicast stream IP
		address.
		To determine the current multicast stream IP
		address without changing it, use the command
		without an argument.
		Default: 225.0.0.37
STREAMINPORT	<5001...65535>	Sets or displays the incoming multicast stream
		transmission port.
		To determine the current port without changing it,
		use the command without an argument.
		Default: 6000
STREAMINSTOP	(none)	Stops the incoming multicast stream.
STREAMOUT	(none)	Initiates the outgoing multicast stream transmission
		from the server DGy 201x.
STREAMOUTADDR	[ddd.ddd.ddd.ddd]	Sets or displays the outgoing multicast stream IP
		address.
		To determine the current IP address without chang-
		ing it, use the command without an argument.
		Default: 225.0.0.37
STREAMOUTPORT	<5001...65535>	Sets or displays the outgoing multicast stream
		transmission port.
		To determine the current port without changing it,
		use the command without an argument.
		Default port setting: 6000
STREAMOUTSTOP	(none)	Stops the outgoing multicast stream transmission.
RECordFrameRate	<0 .. 100>	When streaming, this must be set to 0 to allow the
		DGy to automatically calculate the maximum rate.
		Default: 0

350-9047 v3.0.1 DGy Model 201x User’s Guide 106