COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 108
. . . . .
CLIP AND DISK
. . . . . . . . .
COMMANDS
Individual recordings are known as clips. Clip and disk management commands are described in this section.Table 6-8 Clip and Disk Commands
Command Argument Description
BUZZerFUNCtion <OFF | FULL | [1..100]> Sets when the buzzer will sound and the front
panel LED indicators will flash. FULL causes
the buzzer to sound when there is no disk
space left. The numeric argument causes the
buzzer to sound when that percentage of the
disk space has been used.
For example, with BUZZFUNC set to 95, the
buzzer will sound (and the front panel disk-full
lights will blink) when there is about 12 GB of a
238 GB drive available.
Notes: The buzzer never sounds if
RECordLOOP is ON. If BUZZFUNC is OFF
the buzzer doesn’t sound.
Default: 95
BUZZerReSeT(none) Turns the buzzer off.
Note: Using this command does not change
the settings of BUZZerFUNCtion.
CoPyCLIP <clipname1>
<clipname2> Creates clipname2 as an identical copy of
clipname1. Relative or absolute pathnames
are allowed.
CurrentCLIP (none) Gives the name of the clip currently being
played.
DELeteCLIP [-R] <clipname> Deletes named clip. Clipname can contain
Unix style wild cards, and may be used to
specify multiple clips. DELCLIP * deletes all
clips in the directory.
The -R flag indicates that DELCLIP should
recurse through subdirectories in an attempt to
find clips to delete.