COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 100
. . . . .
PLAY AND RECORD
. . . . . . . . .
COMMANDS
The table below describes the DGy 201x play and record commands,
including event marks.
Note Clipname entries are case sensitive.
Table 6-6 DGy 201x Play and Record Commands
Command Arguments Description
MachineSTATus Displays the operational state of the DGy.
Record
Record Pause
Play
Play Pause
Stop
Send Stream
Receive Stream
When the Simultaneous Record/Play option is
installed, multiple values will be returned.
RECord [-P] [clipname] This command switches the DGy to Record mode.
If an argument is given, that argument is used as
the name of the clip. If no argument is given, the clip
name reflects the record start time, in the form
yyyymmddhhmmss.
The optional -P argument places the recording into
a Record Pause mode. In this mode the recorder
will enter the record mode, but will not start
recording until a subsequent RECord command is
received. This provides the ability to set up the
recorder for an instant start.
Note: To switch from Record to any other recorder
function, first issue the STOP command.