RGB Spectrum DGy 201x manual Playloop, PLAYSPeeD, Pause, NextCLIP, PrevCLIP

C O M M A N D L I N E I N T E R F A C

.E

		.
		Commands
		. . .
Table 6-6DGy 201x Play and Record Commands (Continued)
Command	Arguments	Description
PLAYLOOP	<ON OFF>	This command modifies the behavior of PLAY. If
		PLAYLOOP is OFF then PLAY plays its clip (or
		list of clips) once, then stops. If PLAYLOOP is ON,
		PLAY plays the listed clip(s) in a loop until STOP is
		issued.
		Default: OFF
SYNChronizedSTATus	(none)	Lists information about any queued synchronized
		command. See SYNChronizedPLAY and
		SYNChronizedRECord.
PLAYSPeeD	[-100.0 ... 100.0 ]	This command sets the DGy 201x play speed.
		PLAYSPeeD = 1.0 represents normal speed in the
		forward direction.
		Positive PLAYSPeeD values represent playback in
		the forward direction.
		To play in fast forward use a positive value of
		PLAYSPeeD greater than 1.0.
		To play in slow motion, use a positive value
		between 1.0 and 0.0.
		Negative PLAYSPeeD values represent playback in
		reverse.
		To play in fast reverse use a negative value greater
		than -1.0
		To play in slow reverse use a negative value
		between -1.0. and 0.0.
		Example: Set the play speed for 8 times normal in
		the reverse direction.
		PLAYSPD -8.0
		Example: Set the play speed for 1/10 normal
		speed in the forward direction.
		PLAYSPD 0.1
		Default: 1.0
PAUSE	(none)	In Play mode, this command pauses playback.
		Playback resumes when the Play command is
		sent.
		In Record mode, this command pauses record.
		Record resumes when the Record command is
		sent.
NextCLIP	(none)	Cues the DGy from the currently playing clip to the
		beginning of the next recorded clip. Works in Play
		or Pause modes.
PrevCLIP	(none)	Moves the DGy from the currently playing clip to the
		beginning of the previously recorded clip, then cues.
		Works in Play or Pause modes.

350-9047 v3.0.1 DGy Model 201x User’s Guide 103