COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 90
. . . . .
GAMma Output Sets the playback gamma.
HANDShaking Miscellaneous Selects hardware or software handshaking for the serial control
port.
Help Miscellaneous Help, without an argument will display the entire serial
command set.
HOSTNAME Miscellaneous Sets Ethernet hostname.
ID Miscellaneous Displays product ID, serial number, name, firmware version,
date of manufacture and more.
INputAutoSync Input Engages the RGB input autosync circuitry.
INputFormat Input Reports the type of signal selected for record.
INputLOAD Input Loads the indicated entry from the Timing List to the RGB input
channel.
INputMODulus Input Adjusts the sample point of the analog RGB analog/digital
converter to optimize the digitized picture quality.
INputNAME Input Assigns a name to the input and its timing characteristics.
INputSAVE Input Saves the RGB input characteristic to the selected entry in the
Timing List.
INputSouRCe Input Selects between DVI and RGB input types.
INputTiMing Input Sets the timing of the analog RGB input.
IPADDRess Miscellaneous Sets or reports the DGy 201x IP address.
IPGateWay Miscellaneous Sets or reports the IP gateway address.
IPSubNET Miscellaneous Sets or reports the system subnet mask.
IRIGSTandarDTime Sets the type of IRIG signal to be connected to the IRIG input.
LiStCLIPsClip/Disk Displays a list of all recorded clips in the current directory.
ListEVeryMARK Record/Play Lists the timecode and description of all event marks in all clips
on both disks.
ListMARK Record/Play Displays the timecode and description of the mark number
specified.
MACADDRess Miscellaneous Displays the DGy 201x MAC address.
MachineSTATus Record/Play Displays the operational state of the DGy.
MARK Record/Play Creates an event mark within the current clip.
MKDIR Clip/Disk Makes a new directory. Relative or absolute pathnames are
allowed.
MOUNT Clip/Disk Mounts an optional remote drive to the DGy file system.
NextCLIP Record/Play Moves from the current clip (in Play or Pause) to the beginning
of the next clip.
NEXTMARK Record/Play Sends the recorder to the next event mark from the current
position and cues there.
Table 6-1 Alphabetical Command Summary (Continued)
Command Category Description