RGB Spectrum DGy 201x 4Audio Commands, Command Arguments Description AUDioFREQuency, AUDioMoDe

C O M M A N D L I N E I N T E R F A C

.E

		.
		Commands
		. . .
. . . . . . . . .	The table below lists all DGy 201x audio commands, their arguments
AUDIO COMMANDS
	and detailed descriptions.
Table 6-4Audio Commands
Command	Arguments	Description
AUDioFREQuency	<11.025 22.05 44.1>	Sets the sample rate in kHz of the audio input.
		Default: 44.1 (CD quality).
AUDioMoDe	<L R Stereo OFF>	Determines which, if any, audio source is recorded.
		If AUDioMoDe is set to L or R, the audio is routed
		to both output channels on replay.
		If AUDioMoDe is set to Stereo, the Left and Right
		audio channels are routed independently to the Left
		and Right audio output connectors (Stereo or
		separate audio).
		If AUDioMoDe is set to OFF, audio is not recorded.
		Note: This command does not affect playback. A
		clip containing audio will be replayed independent
		of the setting of this command.
		Default: OFF
AUDioPHANTom	<ON OFF>	Supplies the low voltage phantom power, required
		by some electronic microphones. The setting of
		AUDioPHANTom is ignored unless
		AUDioSouRCe is MIC.
		Default: OFF
AUDioSouRCe	<MIC LINE>	Determines whether input sensitivity is appropriate
		for microphone or line level signals. If
		AUDioSouRCe is set to LINE, phantom power is
		disabled automatically (but the setting of
		AUDioPHANTom remains unchanged).
		Default: LINE

350-9047 v3.0.1 DGy Model 201x User’s Guide 97