RGB Spectrum DGy 201x manual 10Miscellaneous Commands, BAUDrate, Echo, Hostname

C O M M A N D L I N E I N T E R F A C

.E

				.
				Commands
				. . .
MISCELLANEOUS	The table below lists all DGy 201x miscellaneous commands, their
. . . . . . . . .	arguments and detailed descriptions.
COMMANDS
Table 6-10Miscellaneous Commands
Command		Arguments	Description
Help		[<command>]	Help, without an argument will display the entire
			serial command set. Help, with a command as an
			argument will display detailed information about
			that command.
ID		(none)	Displays the following DGy information:
			•	Product type
			•	Date of manufacture
			•	Serial number
			•	Firmware version number
			•	Input type
VERsion		(none)	Displays the following DGy information:
			•	Firmware version
			•	FPGA version number,
			• Web Control Panel (WCP) version
				number.
BAUDrate		<9600 19200	Sets the serial port baud rate. Operation of the
		38400 57600	serial port at the highest possible speed is
		115200>	recommended.
			Default: 115,200
ECHO		<ON OFF>	Turns the serial echo On/Off. The echo is only on
			commands typed and sent to the unit.
			Note: The Echo setting has no effect on responses
			issued by the DGy; responses are always visible,
			regardless of the Echo status.
			Default: ON
HANDShaking		<HardWare	Sets the type of flow control on the serial port.
		SoftWare>	The HardWare handshaking uses CTS/RTS
			control.
			The SoftWare handshaking protocol is XON-XOFF.
			Default: SoftWare
HOSTNAME		<hostname>	Sets Ethernet hostname.
			Default: DGy

350-9047 v3.0.1 DGy Model 201x User’s Guide 115