COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 92
. . . . .
RestoreFactoryDefaults Miscellaneous Restores all user settings to their factory default values.
SeekToMARK Record/Play Sends the recorder to the specified event mark and cues there.
SHUTDOWN Miscellaneous Remotely shuts down the DGy 201x.
STOP Record/Play This command cancels Play, Pause, and Record functions.
StreamFragmentSTATus Stream Reports the multicast streaming state of the system.
STREAMIN Stream Initiat
es the incoming multicast stream for decoding and viewing.
STREAMINADDR Stream Sets or displays the incoming multicast stream IP address.
STREAMINPORT Stream Sets or displays the incoming multicast stream port.
STREAMINSTOP Stream Stops the incoming multicast stream.
STREAMOUT Stream Initiates the outgoing multicast stream transmission.
STREAMOUTADDR Stream Sets or displays the outgoing multicast stream IP address.
STREAMOUTPORT Stream Sets or displays the outgoing multicast stream transmission
port.
STREAMOUTSTOP Stream Stops the outgoing multicast stream transmission.
SYNChronizedPLAY Record/Play Sets up the DGy to start playback of a specified clip at a pre-
determined time.
SYNChronizedRECord Record/Play Sets up the DGy to start recording at a pre-determined time.
SYNChronizedSTATus Record/Play Reports the status of any queued synchronized commands.
SYNChronizedSTOP Record/Play Cancels all pending queued synchronized commands.
SYStemReSet Miscellaneous Restarts the DGy firmware.
TestPattern Miscellaneous Enables or disables the internal test patterns.
TimeCodeQuery Record/Play Returns the timecode at the current clip position.
TimeZone Time Sets the time zone relative to UTC.
TiMingDELete Input Deletes the specified timing entry from the Timing List.
TiMingLIST Input Displays the list of saved input and output timings.
TiMingLISTCLEAR Input Deletes all user entries from the Timing List.
TiMingLISTLOAD Input Create and save a custom timing list entry into the user space.
UMOUNT Clip/Disk Unmounts a remote drive from the DGy file system.
UNPROTECTCLIP Clip/Disk Change the status of a protected clip to unprotected.
UpdateFirmWare Miscellaneous Updates the firmware for the DGy.
VERsion Miscellaneous Displays the version numbers of the installed firmware
components.
VOLumeINFO Clip/Disk Displays disk storage parameters.
VOLumeNAME Clip/Disk Used to read or write the DGy disk volume name.
Table 6-1 Alphabetical Command Summary (Continued)
Command Category Description