COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 91
. . . . .
NTSIP Time Sets the addresses of Network Time Servers used to
synchronize the internal DGy clock.
OUTPUT Output A query command which returns information on the current
output timing.
OutPuTForMaT Output This command selects the active format, analog RGB or DVI.
OutputMode Output Sets the output mode to FreeRun or PlayBack.
OutPutTiMing Output Sets the timing for the current output.
OutPutTiMingLOAD Output Sets the output raster to the timing selected from the Timing
List.
OutPutTiMingNAME Output Assigns a name to the current output timing.
OutPutTiMingSAVE Output Saves the timing data of the current output raster into the Timing
List.
PAUSE Record/Play This command pauses the Play or Record mode.
PLAY Record/Play Switches the DGy to Playback mode and plays a previously
made recording.
PLAYLOOP Record/Play Plays the current clip or list of clips to the end and automatically
replays the list until stopped.
PLAYSPeeDRecord/Play Set the playback speed. Applies to Forward and Reverse play
modes.
PrevCLIP Record/Play Moves DGy from the current clip (in Play or Pause) to the
beginning of the previous clip.
PREVMARK Record/Play Sends the recorder to the previous event mark from the current
position and cues there.
PROTECTCLIP Clip/Disk Change the status of an unprotected clip to protected.
PWD Clip/Disk Gives the absolute path of the current directory.
RealTimeClockSET Time Sets the internal DGy real time clock.
RealTimeClockSYNC Time Provides a means to synchronize a DGy to an external time
reference or other DGy units.
RealTimeClockSYNCPERi
od Time Sets the update rate for synchronizing the DGy internal clock to
an external time reference.
RealTimeSeek Clip/Disk Places the DGy at the selected recording real-time within the
selected clip.
RECord Record/Play This command switches the DGy to Recording mode.
RECordBitRate Record/Play Sets the degree of compression i.e. quality level (Stated in bits/
pixel).
RECordFrameRate Record/Play Sets the rate at which input frames are compressed and stored
to disk.
RECordLOOP Record/Play Enables or disables the disk overwrite feature.
RENameCLIP Clip/Disk Renames clipname1 to clipname2.
Table 6-1 Alphabetical Command Summary (Continued)
Command Category Description