Extron electronic DTP DVI 230 manual Reference Information, Mounting the Transmitter or Receiver

Reference

Information

This section provides procedures for mounting the DTP DVI 230 Tx/Rx transmitter and receiver and disconnecting the ground between them.

•Mounting the Transmitter or Receiver

•Disconnecting the Ground

Mounting the Transmitter or Receiver

ATTENTION:

•Installation and service must be performed by authorized personnel only.

•Avoid ground potential differences between the transmitter and receiver installation sites, which can lead to equipment damage or a missing or unstable picture. If a potential difference cannot be avoided, remove the ground connection between the units and locally power both units (see Disconnecting the Ground on the next page).

The 1-inch high, quarter rack width DTP DVI 230 transmitter or receiver can be placed on a table, mounted in a rack, or mounted under a desk or table. The receiver can also be mounted on a projector bracket.

Tabletop Use

Affix the included rubber feet to the bottom of the unit and place it in any convenient location.

Mounting kits

Mount the unit using any optional compatible mounting kit listed on the Extron website (www.extron.com), in accordance with the directions included with the kit. For rack mounting, see UL Rack-Mounting Guidelines on the next page.

DTP DVI 230 Tx/Rx Transmitter and Receiver • Reference Information 10