Extron electronic DVI DA6 Plus, DVI DA8 Plus, DVI DA4 Plus manual Installation and Operation, cont’d

Installation and Operation, cont’d

Rack mounting the DVI DA6 Plus and DVI DA8 Plus

The DVI DA6 Plus and DVI DA8 Plus distribution amplifiers can be mounted using the Extron MBD 149 rack mount kit (provided) as follows:

1.Remove rubber feet if these have been installed on the bottom of the unit.

2.Secure one bracket to each side of the distribution amplifier with the provided bracket mounting screws (four #8 screws for each bracket — see the figure below).

MBD 149 Bracket

FRONT

Rack mounting screws

Bracket mounting screws

Rack mounting the DVI DA6 Plus or DVI DA8 Plus

3.Align the holes in the mounting brackets with holes in the rack and secure the unit with brackets to the rack using the four rack-mounting screws and four washers provided with the mounting kit.

2-4 DVI DA Plus Series • Installation and Operation