Quick Start Guide — DVI DA Plus Series
To install, connect cables, and operate any of the DVI DA Plus Series distribution amplifiers, follow these steps:
Step 1: Install
Install the distribution amplifier on a desk, under a desk, or in a rack (see page
Step 2: Connect Power Cables
Connect the 12 VDC power supply (provided with the unit) to the unit's power receptacle, using the two pole, 3.5mm captive screw connector (see page
POWER 12V
1.0A MAX
Back Panel Power Receptacle
DC Power Cord
Captive Screw Connector
Ground +12 VDC
External
Power Supply
(12 VDC, 2 A )
AC Power Cord
The external power supply in the illustration above (12 VDC, 2A) is for use with the DVI DA4 Plus. The DVI DA6 Plus and DVI DA8 Plus use a 12 VDC, 3A external power supply.