Extron electronic DVI DA4 Plus, DVI DA6 Plus manual Rear Panel Features, Rear panel features

Rear Panel Features

The rear panels for the DVI DA4 Plus (top panel), the DVI DA6 Plus (middle panel), and DVI DA8 Plus (bottom panel) are shown below:

					DVI DA4 Plus
POWER	DVI-D INPUT			DVI-D OUTPUT
12V		1	2	3	4
1.0A MAX

2	3		4
							DVI DA6 Plus
POWER	DVI-D INPUT				DVI-D OUTPUT
12V		1	2	3	4	5	6
1.5A MAX

2	3				4
									DVI DA8 Plus
POWER	DVI-D INPUT				DVI-D OUTPUT
12V		1	2	3	4	5	6	7	8
1.5A MAX

	Rear panel features
B	Power input — Connect the external power supply (provided)
	to the 3.5 mm, 2-pole captive screw power receptacle.
C	Input connector — Connect the input signal to the female DVI-I
	connector. The DVI input signal is equalized to ensure integrity.
D	Output Connectors — Connect up to four (DVI DA4 Plus),
	six (DVI DA6 Plus) or eight (DVI DA8 Plus) DVI-D outputs to
	display devices, using the female DVI-I connectors.
	N Although these distribution amplifiers have DVI-I
	connectors, they are only compatible with single-link
	DVI-D video signals.
	N The DVI DA Plus series distribution amplifiers are not
	HDCP compliant.

DVI DA Plus Series • Installation and Operation 2-7