Installation and Operation, cont’d
Power supply input
Connect the two pole, 3.5 mm captive screw connector from the power supply (provided with the unit) to this orange socket on the rear panel.
POWER 12V 
1.0A MAX
Back Panel Power Receptacle
DC Power Cord
Captive Screw Connector
Ground 
+12 VDC
External
Power Supply
(12 VDC, 2 A )
AC Power Cord
The external power supply in the illustration above (12 VDC, 2A) is for use with the DVI DA4 Plus. The DVI DA6 Plus and DVI DA8 Plus use a 12 VDC, 3A external power supply.
