Installation, cont’d
Cable Connections and Switches
DVI-D input
Connect the DVI-D source device to the female DVI-I input connector.
The dual link DVI-D input carries a signal with a resolution up to 2560x1600 @ 60 Hz.
For sources providing HDMI signals, use an HDMI to DVI adapter, such as the Extron HDMIF-DVIDM female HDMI to male DVI-D adapter (PN 26-616-01). The pin assignments for the DVI-I input connectors are shown in the table on the next page.
DVI-D output
Connect the local display device to the female DVI-I output connector on the rear panel of the transmitter and the remote display device to the output connector on the front panel of the receiver.
The dual link DVI-D output carries a signal with a resolution up to 2560x1600 @ 60 Hz.
The pin assignments for the DVI-I output connectors are the same as those for the input connectors and are shown in the table on the next page.
NAlthough DVI-I connectors are used, the DVI DL 201 is compatible only with DVI-D signals.
2-12 DVI DL 201 Tx/Rx • Installation