![](/images/new-backgrounds/1031534/3153411x1.webp)
Quick Start Guide — DVI DL 201 Tx/Rx, cont’d
To use DDC pass-through routed to the local monitor:
a. Configure the DDC switches as shown in the figure at right and described on page
b. Connect a source device to the transmitter.
c. Connect a display device to the receiver and, if required, a local monitor to the transmitter.
d. Connect the transmitter and receiver.
e. Power on the transmitter, receiver, and local monitor.
f. Power on the source device. g. Power on the display device.
To use DDC pass-through routed to the remote display:
a.Configure the DDC switches as shown in the figure at right and described on page
b.Connect a source device to the transmitter.
c.Connect a display device to the receiver and, if required, a local monitor to the transmitter.
d.Connect the transmitter and receiver.
e.Power on the transmitter, receiver, and display devices.
f.Power on the source device.
| EDID MINDER | DEFAULT EDID | REMOTE DDC |
ON ON |
|
| |
OFF | 1 | 2 | 3 |
|
|
|
| EDID MINDER | DEFAULT EDID | REMOTE DDC |
ON ON |
|
| |
OFF | 1 | 2 | 3 |
|
|
|
NIf there are any problems, consult the troubleshooting section (page
Extron
DVI DL 201 Rx
DVI Dual Link
Receiver
Extron
Twisted Pair Cables (3) 100’
L |
SS RSSS THRU |
PATx RxPA |
Tx Rx RxS |
SERIE201 |
DVI DL 201 Tx
DVI Dual Link Transmitter
| OUTPUT | I | DLRx |
DL |
| ||
DVI DVI | DVI |
|
OUTPUT 2
1
OUTPUT
OUTPUT
LOCAL
DVI |
3
DVI Dual Link
POWE | R | |
| ||
12V | MAX | |
0.4A |
|
|
High Resolution Projector with
Dual Link Input
Local Monitor
PC with Dual Link
DVI Output