Configuration and Operation

Configuration

Using the EDID Minder to read and store EDID from a display

During boot up, the DVI-D source device uses Display Data Channel (DDC) to obtain Extended Display Identification Data (EDID) from the display device. This allows the output signal to match the resolution and refresh rate of the display device.

The DVI DL 201 Tx/Rx uses Extron's EDID Minder, which allows the user to store and use EDID from any display device. To use this feature, follow these steps:

1. Disconnect all devices and cables from the transmitter and receiver.

2. Connect the desired display to the transmitter's Local Monitor output. For best results, the cable for this connection should be 15' (4.5 m) or shorter.

3. Apply power to the transmitter and the display device. If necessary, connect the power supply to the transmitter.

4. Set the EDID Minder switch on the transmitter to the on (up) position (see the figure at right).

5. Set the Default EDID switch to the off (down) position (see the figure at right).

6. Set the Remote DDC to the off (down) position to allow DDC routing to go to the local monitor (see the figure at right).

 

EDID MINDER

DEFAULT EDID

REMOTE DDC

ON ON

 

 

OFF

1

2

3

 

 

 

NThe EDID Minder extracts information only from the local monitor, not from the remote display.

7. Press and release the EDID Minder Store button. The LED next to the switch turns from green to amber. This indicates that the transmitter is reading and extracting the EDID from the display connected to the local monitor output.

EDID

STORE

When the information has been successfully extracted and stored in non-volatile memory, the LED returns to green.

8. Turn off the display and disconnect it from the transmitter.

9. Connect the transmitter to the receiver with the three twisted pair cables.

•Transmitter port 1 connects to receiver port 1.

•Transmitter port 2 connects to receiver port 2.

•Transmitter port 3 connects to receiver port 3.

3-2 DVI DL 201 Tx/Rx • Configuration and Operation

Page 33 Page 35
Page 34
Image 34
Extron electronic DVI DL 201 Tx Configuration and Operation, Using the Edid Minder to read and store Edid from a display
Page 33 Page 35

DVI DL 201 Tx, DVI DL 201 Rx specifications

Extron Electronics is renowned for its high-quality audio-visual solutions, and their DVI DL 201 TX/RX and DVI DL 201 RX are no exception. These devices are designed to facilitate digital video signal transmission over long distances, making them ideal for professional AV setups in educational institutions, corporate environments, and large venues.

The Extron DVI DL 201 TX (transmitter) and DVI DL 201 RX (receiver) feature advanced technology that supports DVI Dual Link video signals. This capability allows for the transmission of high-resolution video up to 2560x1600 at 60Hz, ensuring crisp and clear visuals essential for modern presentations and video playback.

One of the standout features of the DVI DL 201 series is its ability to extend DVI signals up to 200 feet (60 meters) using a single CAT 6 cable. This long-distance capability is particularly beneficial in expansive installations where traditional cabling may not suffice. The use of Exton’s advanced technology allows these devices to maintain signal integrity even at longer distances, mitigating concerns about video degradation.

The DVI DL 201 TX/RX is equipped with hot-plug detection, ensuring that both the transmitter and receiver can automatically recognize connected devices without the need for manual intervention. This enhances ease of use and simplifies the setup process for system integrators. Additionally, the devices are designed with a compact form factor, allowing for flexibility in installation without taking up excessive space.

Another notable characteristic of the DVI DL 201 series is its compatibility with a range of DVI sources and displays, making it a versatile solution in mixed technology environments. This flexibility, combined with their durability, makes these devices a reliable choice for any AV installation.

Furthermore, Extron incorporates thorough engineering in their products, ensuring that both the DVI DL 201 TX and RX meet high standards of performance and reliability. The devices are backed by Extron’s comprehensive support and warranty services, providing peace of mind for end-users.

In conclusion, the Extron DVI DL 201 TX/RX and DVI DL 201 RX introduce a robust solution for extending DVI signals, ensuring high-quality video transmission across considerable distances. With their advanced features and technologies, they are an excellent choice for any professional AV application.
Top Page Image Contents