Extron electronic DVI DL 201 Rx, DVI DL 201 Tx user manual Rack mounting procedures

Rack mounting procedures

The unit can be mounted in the front or rear of:

•RSU 126 (6" deep 1U universal rack shelf kit: PN 60-190-10)

•RSB 126 (6" deep 1U basic rack shelf: PN 60-604-10)

•RSU 129 (9.5" deep 1U universal rack shelf kit: PN 60-190-01)

•RSB 129 (9.5" deep 1U basic rack shelf: PN 60-604-01)

To mount the unit, follow these instructions:

1. Remove rubber feet if these have been installed on the bottom of the unit.

2. Align the unit on the shelf and secure it to the shelf with two 4-40 x 3/16" screws in diagonally opposite corners (see the figure below, which shows installation using the

RSU 129 shelf).

3. Install false faceplate(s) or other unit(s) to the rack shelf.

4. Attach the shelf to the rack with the four provided 10-32 x 3/4" bolts

1U Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

Front false faceplate uses 2 screws.

Use 2 mounting holes on opposite corners.

(2)4-40 x 3/16" Screws

Installing the DVI DL 201 Tx on a rack shelf

DVI DL 201 Tx/Rx • Installation 2-3