Installation and Operation, cont’d
Panel Features
EDID 101D
DVI OUTPUT (DISPLAY)
g
CONFIG
VGA OUTPUT (DISPLAY)
| ON |
|
| 1 | 2 |
| 60 | DIGITAL |
RECORD | Hz | SIGNAL |
| 50 | ANALOG |
a b c d
| ON |
|
| 1 | 2 |
| 60 |
|
RECORD | Hz | SPARE |
| 50 |
|
EDID
SELECT
EDID 101V
EDID
SELECT
DVI INPUT (SOURCE)
POWER 12V
0.4A MAX
e f
VGA INPUT (SOURCE)
POWER 12V
0.4A MAX
EDID 101 Panel views
Side panel
A
B
Power LED —
Green — Indicates power is connected from the 5 VDC pin of a DVI/VGA video source or by the optional 12 VDC power supply (E).
Flashing red — During the recording process, indicates a new EDID being written to memory, returning to solid green when the write completes.
Record button — This recessed button is used to initiate recording of a connected display device EDID to
user‑programmable memory (position 0 on the rotary switch).
C | DIP switch — Position 1 is used to select the vertical refresh |
| frequency for the |
| "Off", the EDID selected by rotary positions 1 through F are |
| based on 50 Hz. When switched to "On", they are based on |
| 60 Hz (default position). |
| Position 2, (not used on EDID 101V; labeled "Spare"), selects the |
| signal format, digital or analog, for the |
D | EDID Rotary Switch — Position 0 of this 16 position rotary |
| switch is used to record an EDID from a display. |
| Positions |
| N Configuring the EDID 101 rotary and DIP switches |
| allow a user to select a |
| the native rate of a display (i.e. 1280x1024 @ 60 Hz) |
| and a desired signal type (i.e. digital), but does not |
| necessarily force a video source to output that rate. Since |
| EDID is not limited to reporting a single video rate |
| (i.e. the native rate), each Extron EDID also lists other |
| common video rates for use by the video source. |
8EDID 101D/EDID 101V • Installation and Operation
