Front and rear panels
E | Power connector — An optional external 12 VDC power |
| supply may be connected to this |
| connector. |
| N During normal operation the EDID 101 is powered |
| using +5 VDC from pin 9 of a DDC compliant VGA |
| source (EDID 101V) or pin 14 of a DVI source |
| (EDID 101D). |
| If the source is capable of providing power for the |
| EDID 101, the green Power LED (A) will light when |
| the source is connected and powered on. |
| When the EDID 101 is powered from a video source, |
| there is no need to connect an external power supply. |
F | Input connector — EDID 101D – Female |
| EDID 101V – Female |
G | Output connector — EDID 101D – Female |
| EDID 101V – Female |
| N |
| EDID 101D to analog displays and sources having VGA |
| connectors. EDID functionality, if the VGA source |
| supports it, will remain available. |
| N The EDID 101 is a |
| located as close to the input source as possible. |
| The total length of DVI cabling, including input and |
| output cables, connected to the EDID 101D should not |
| exceed maximum recommended lengths for standard |
| DVI applications. |
EDID 101D/EDID 101V • Installation and Operation | 9 |
