Extron electronic FOX 500 DA6 user manual Command/response table for SIS commands

3-8 FOX 500 DA6 • Remote Control

Command/response table for SIS commands

Command	ASCII Command	Response	Additional description
	(host to unit)	(unit to host)
Video mute
Mute output	1B	Blk1]	Blank the video output.
Unmute output	0B	Blk0]	Output video.
Show video mute status	B	X!]	Video ouput mute status is X!(0 = unmuted, 1 = muted).
Output sync format
Set output sync format	6*X@#	SynX@]	Set the sync format. 0 = RGBHV, 1 = RGsB.
Show output sync format	6#	X@]
Output sync polarity
Set output to sync negative	7*1#	Pol1]	Receiver output sync (H and V for RGBHV, S for RGBS, or
			s for RGsB) is always negative.
Set output sync to follow	7*0#	Pol0]	Output sync follows the video sync input to the DA.
the input
Show the sync polarity	7#	X#]
Horizontal shift
Set a horizontal position	X$H	HphX$]	Set horizontal centering to X$.
Increment position.	+H	HphX$]	Shift the image one pixel to the right.
Decrement position	-H	HphX$]	Shift the image one pixel to the left.
Show position	H	X$]

Remote Control, cont’d

FOX 500 DA6 • Remote Control 3-9

Command/response table for SIS commands (continued)

Command	ASCII Command	Response	Additional description
	(host to unit)	(unit to host)
Vertical shift
Set a vertical position	X$/	VphX$]	Set vertical centering to X$.
Increment position	+/	VphX$]	Shift the image down one line.
Decrement position	-/	VphX$]	Shift the image up one line.
Show position	/	X$]
Horizontal start
Set a start position	X%)	HstX%]	Set the horizontal location of the first active pixel in the
			active window.
Example:	128)	Hst128]	Set pixel 128 as the first active pixel.
Increment start position	+)	HstX%]	Increase the horizontal start location value.
Decrement start position	-)	HstX%]	Decrease the vertical start location value.
Show start position	)	X%]
Pixel phase
Set a pixel phase value	X^U	PhsX^]	Set the pixel phase value to X^.
Example:	10U	Phs10]	Set the pixel phase value to 10.
Increment pixel phase	+U	PhsX^]	Increase pixel phase value by 1.
Decrement pixel phase	-U	PhsX^]	Decrease pixel phase value by 1.
Show pixel phase	U	X^]