Extron electronic FOX 500 DA6 user manual Audio mute, Auto memory, Auto image, Test pattern

3-	Command/response table for SIS commands (continued)
12
	Command	ASCII Command	Response	Additional description
FOX		(host to unit)	(unit to host)
	Audio mute
500	Mute the audio	1Z	Amt1]	Silence the receiver's audio output.
	Unmute the audio	0Z	Amt0]	The receiver outputs audio.
DA6 •
	Show mute status	Z	X!]
	Auto memory	55#	X!]
Remote	Show auto memory status
	Disable auto memory	55*0#	Img0]
	Enable auto memory	55*1#	Img1]
Control
	Auto image
	Trigger auto image	55*2#	Img]
	Front panel lock (Executive mode)
	Lock the front panel	1X	Exe1]
	Unlock the front panel	0X	Exe0]
	Show the panel lock status	X	X!]

Command/response table for SIS commands (continued)

Command	ASCII Command	Response	Additional description
	(host to unit)	(unit to host)
Test pattern

NYou must have a video input connected and fiber cable Optical 1 connected between the DA and receiver for the receiver to output a selected test pattern.

	The test pattern turns off if the input signal rate is changed or disconnected or if power is removed.
	Output Color Bars	1J	Tst1]	Set the receiver to output the Color Bars test pattern.
	Output grayscale	2J	Tst2]	Set the receiver to output the grayscale test pattern.
	Output alt. pixels	3J	Tst3]	Set the receiver to output the alternating pixels test
				pattern.
FOX	Test pattern off	0J	Tst0]	Set the receiver to output the input video (no test pattern
				selected).
	Show test pattern status	J	X1$]
500 DA6 • Remote Control
3-13

Remote Control, cont’d