Extron electronic FOX 500 DA6 Total pixels, Remote, List sync frequency, Control, Memory presets

3-	Command/response table for SIS commands (continued)
10
	Command	ASCII Command	Response	Additional description
FOX		(host to unit)	(unit to host)
	Total pixels
	Set a total pixel value	11*X&#	TpxX&]	Set the total pixels to a specific value.
500
	Example:	11*1555#	Tpx1555]	Set the total pixel value to 1555.
DA6 •
	Increment total pixel value	+11#	TpxX&]	Increase total pixel value by 1 pixel.
	Decrement total pixel value	-11#	TpxX&]	Decrease total pixel value by 1 pixel.
Remote	Show total pixel value	11#	TpxX&]
	List sync frequency
	View input frequency	1LS	X*,X*]	List the input frequency as X*kHz (horizontal) and X*
Control				Hz (vertical.
	Memory presets
	Save preset	X(,	SprX(]	Command code is a comma.
	Recall preset	X(.	RprX(]	Command code is a period.

Command/response table for SIS commands (continued)

Command	ASCII Command	Response	Additional description
	(host to unit)	(unit to host)

Audio input gain and attenuation

NThe set gain (G) and attenuation (g) commands are case sensitive.

	Set input audio gain to	X1)G	AudX1@]
	+ dB value
	Example:	2G	Aud+02.0]	Set the input audio gain to +2 dB.
	Set input audio attenuation	X1!g	AudX1@]
	to - dB value
	Increment level	+G	AudX1@]	Increase audio level by 1.0 dB.
FOX	Example:	+G	Aud+03]	Increment the audio input level from +2 dB to +3 dB.
	Decrement level	-G	AudX1@]	Decrease the audio level by 1.0 dB.
500	Example:	-G	Aud-09]	Decrement audio input level from -08 dB to -9 dB.
	Show input gain	G	X1@]
DA6 •
	Audio output level
	Set to consumer level	40*0#	Lvl0]	Set the DA's audio output to the consumer (–10 dBV)
Remote				level.
	Set to professional level	40*1#	Lvl1]	Set the DA's audio output to the professional (+4 dBu)
				level.
Control	Show audio output level	40#	X1#]	0 = consumer, 1 = professional.
3-11

Remote Control, cont’d