Controlling Onkyo components without u
If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control an Onkyo component that’s not connected via u, use the following remote control codes:
`30627:
Onkyo DVD player without u
`71817:
Onkyo CD player without u
`32900/33000:
Onkyo
`32901/33004:
Onkyo HD DVD player
`70868:
Onkyo MD recorder without u
`71323:
Onkyo CD recorder without u
`82990:
Onkyo Dock without u
Resetting the REMOTE MODE Buttons
You can reset a REMOTE MODE button to its default remote control code.
1 While holding down the REMOTE MODE button that you want to reset, press and hold down HOME until the remote indicator lights (about 3 seconds).
2 Within 30 seconds, press the REMOTE MODE button again.
The remote indicator flashes twice, indicating that the button has been reset.
Each REMOTE MODE button is preprogrammed with a remote control code. When a button is reset, its preprogrammed code is restored.
En-49
Controlling Other Components
Resetting the Remote Controller
You can reset the remote controller to its default settings.
1 | While holding down RECEIVER, press and hold |
| down HOME until the remote indicator lights |
| (about 3 seconds). |
2 | Within 30 seconds, press RECEIVER again. |
| The remote indicator flashes twice, indicating that the |
remote controller has been reset.
