Presetting AM/FM Stations
You can store a combination of up to 40 of your favorite AM/FM radio stations as presets.
1 | Tune into the AM/FM station that you want to store | |||
| as a preset. | |||
| See the previous section. | |||
2 | Press MEMORY. | |||
| The preset number flashes. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Actual display depends on the country.)
3 | While the preset number is flashing (about 8 |
| seconds), use PRESET e/rto select a preset from |
| 1 through 40. |
4 | Press MEMORY again to store the station or |
| channel. |
The station or channel is stored and the preset number stops flashing.
Repeat this procedure for all of your favorite AM/FM radio stations.
Turning On & Basic Operations
■Selecting Presets
1 To select a preset, use PRESET e/ron the AV
receiver, or the remote controller’s CH
Tip
•You can also use the remote controller’s number buttons to select a preset directly.
■Deleting Presets
1 | Select the preset that you want to delete. |
| See the previous section. |
2 | While holding down MEMORY, press TUNING |
| MODE. |
The preset is deleted and its number disappears from the AV receiver’s display.
