Onkyo HT-RC430 instruction manual En-54

Video

■ There’s no picture

Make sure that all video connecting plugs are pushed	14
in all the way.
Make sure that each video component is properly	15, 17
connected.
If the video source is connected to a component video	16, 37
input, you must assign that input to an input selector,
and your TV must be connected to COMPONENT
VIDEO OUT.
If the video source is connected to a composite video	16
input, your TV must be connected to the
corresponding composite video output.
If the video source is connected to an HDMI input,	15, 37
you must assign that input to an input selector, and
your TV must be connected to the HDMI OUT.
On your TV, make sure that the video input to which	—
the AV receiver is connected is selected.

■There’s no picture from a source connected to an HDMI IN

Reliable operation with an HDMI-to-DVI adapter is 60 not guaranteed. In addition, video signals from a PC

are not guaranteed.

■The on-screen menus don’t appear

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

When the AV receiver is not connected to a TV via — HDMI OUT, on-screen menus are not displayed.

Tuner

■Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light

Relocate your antenna.	—
Move the AV receiver away from your TV or	—
computer.
Listen to the station in mono.	24
When listening to an AM station, operating the	—
remote controller may cause noise.
Passing cars and airplanes can cause interference.	—
Concrete walls weaken radio signals.	—
If nothing improves the reception, install an outdoor	—
antenna.

Remote Controller

■The remote controller doesn’t work

Before operating this unit, be sure to press	—
RECEIVER.
Make sure that the batteries are installed with the	4
correct polarity.
Install new batteries. Don’t mix different types of	4
batteries, or old and new batteries.
Make sure that the remote controller is not too far	4
away from the AV receiver, and that there’s no
obstruction between the remote controller and the AV
receiver’s remote control sensor.
Make sure that the AV receiver is not subjected to	—
direct sunshine or inverter-type fluorescent lights.
Relocate if necessary.
If the AV receiver is installed in a rack or cabinet	—
with colored-glass doors, the remote controller may
not work reliably when the doors are closed.
Make sure you’ve selected the correct remote	10, 48
controller mode.
Make sure you’ve entered the correct remote control	48
code.
Make sure to set the same ID on both the AV receiver	42
and remote controller.

En-54

	Appendix
■ Can’t control other components
	If it’s an Onkyo component, make sure that the u	17
	cable and analog audio cable are connected properly.
	Connecting only an ucable won’t be enough.
	Make sure you’ve selected the correct remote	10, 50
	controller mode.
	For a proper operation of the remote controller as a	33
	cassette tape deck is connected to the TV/CD IN jack,
	or as an RI Dock is connected to the TV/CD IN,
	VCR/DVR IN or GAME IN jacks, you must set the
	input display accordingly.
	If you cannot operate it, you will need to enter the	48
	appropriate remote control code.
	To control an Onkyo component that’s connected via	48
	u, point the remote controller at the AV receiver.
	Be sure to enter the appropriate remote control code
	first.
	To control an Onkyo component that’s not connected	49
	via u, point the remote controller at the component.
	Be sure to enter the appropriate remote control code
	first.

uDock for iPod/iPhone

■ There’s no sound

Make sure your iPod/iPhone is actually playing.	—
Make sure your iPod/iPhone is properly inserted in	—
the Dock.
Make sure the AV receiver is turned on, the correct	—
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.	—
Try resetting your iPod/iPhone.	—

■ There’s no video

Make sure that your iPod/iPhone model’s TV OUT — setting is set to On.

Make sure the correct input is selected on your TV or — the AV receiver.

Some versions of the iPod/iPhone do not output	—
video.