Using Headphones
1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the PHONES jack.
Note
•Always turn down the volume before connecting your headphones.
•While the headphones plug is inserted in the PHONES jack, the speakers are turned off.
•When you connect a pair of headphones, the listening mode is set to Stereo, unless it’s already set to Stereo, Mono, or Direct.
•If you connect an iPod or iPhone to the USB port on the AV receiver, no sound will be output from the headphones jack.
Turning On & Basic Operations
Recording
This section explains how to record the selected input source to a component with recording capability.
AV Recording
Audio sources can be recorded to a recorder (e.g., cassette tape deck, CDR, MD recorder). Video sources can be recorded to a video recorder (e.g., VCR, DVD recorder).
1 | Use the input selector buttons to select the source |
| that you want to record. |
| You can watch the source while recording. The AV |
| receiver’s MASTER VOLUME control has no effect |
| on recording. |
2 | On your recorder, start recording. |
3 | On the source component, start playback. |
| If you select another input source during recording, |
that input source will be recorded.
