Extron electronic FPC 5000 manual From the Make Ties screen , touch the green View Ties button

Matrix 12800 Operation, cont’d

View the ties as follows:

1a.	From any screen other than the Make Ties Screen, touch the blue User >
	amber I/O buttons.
1b.	From the Make Ties screen, touch the green View Ties button.
	The FPC displays one of the View Ties screens. The screen view that the FPC
	displays is the last View Ties screen that was active.
2.	To select the View Ties: input-by-output-selection screen, touch the green
	View Inputs button.
3.	To select the View Ties: outputs-by-input-selection screen, touch the green
	View Outputs button.
4.	To select the View Ties: alternate screen, touch the green Change View button.
Viewing inputs tied to a specified output
View the input tied to a selected output as follows:
1.	If necessary, touch the View Inputs button.		The most recently
	selected View Ties: input-by-output-selection screen appears. See 1 and			3
	on figure 3-8.
2.	If necessary, touch the Change View button		to display screen 1	on
	figure 3-8.
3.	Select the video and/or audio format(s) to view by touching the
	desired blue Signal Type button(s). The first virtual output
	among the selected signal types is displayed in the Virtual
	Output field.
		Available signal types are indicated by a green circle next to the
		buttons. Selected signal types are indicated by a red ring around
		the green circle.
		Video signal types (RGBHV, RGBS, RGsB, YUV, YC, and Video) include the
		audio plane (if there is one in your system). The Audio Only signal type does
		not include any video planes.
	If an input is tied to that output, the input is displayed in the Input Video
	(and/or Audio) field.
	If no input is tied to that output, the Input Video and Audio fields display 0.
4.	Use the output keypad or scroll through the valid outputs to select another
	output for which you desire to view the tied input.
		Leading zeroes are not required for keypad entry.
		If you enter a number for a virtual output that does not exist in the
		Matrix 12800, the number is displayed in red in the keypad display.
5.	Observe that the input tied to the selected output is displayed in the Input
	Video and/or Input Audio field.
6.	To view the input tied to another output, repeat steps 4 and 5.

3-12 FPC 5000 Front Panel Controller • Matrix 12800 Operation