Connecting to the USB Port
The mini Type B USB port is located on the HDMI DA2 front panel (B in figure 7 on page 10). It can be used to connect the distribution amplifier to a host computer to update firmware or for configuration using SIS commands.
1.Connect a USB A to mini B cable between the USB Config port on the front panel of the HDMI DA2 and the USB port of the PC.
Mini Type B | Type A |
USB | USB |
USB
Ports
USB Cable
| INPUT | OUTPUTS |
| |
| 1 | 2 | EDID | |
CONFIG | SIGNAL |
|
| |
|
|
| ||
|
|
|
|
HDCP
HDMI DA2
Computer
HDMI DA2 Front Panel
Figure 4. Connecting a PC to the HDMI DA2 Front Panel USB Port
2.If this is the first time an HDMI DA2 has been connected to the PC, the Found New Hardware Wizard opens. The first screen offers to connect to Windows Update to search the web for the appropriate driver needed for the USB port to communicate with the distribution amplifier. This is not necessary if the USB driver is already on your PC.
HDMI DA2 • Installation | 7 |