Extron electronic MDA 4V EQ, MDA 4SV EQ, MDA 2V EQ Quick Start Guide - MDA EQ Series, Step

Quick Start Guide — MDA EQ Series

To install and set up an MDA EQ Series mini distribution amplifier, follow these steps:

Step 1

Turn all of the equipment off and disconnect it from the power source.

Step 2

Mount the MDA EQ on a projector, under a desktop, or on a rack shelf, as illustrated below. (The illustration shows a VersaTools® rack shelf; you can also use the standard or 6-inch deep Universal 19-inch rack shelves. See Optional Accessories in appendix A.)

Projector

Mounting

Bracket

Ceiling

Projector

Mounting

Bolt

VersaTools Rack Shelf

1/4 Rack Width Front

False Faceplate

Use 2 mounting holes on opposite corners.

(2) 4-40 x 3/16" Screws

Step 3

Wire the MDA EQ power cord and connect it. To wire the power cord, follow these steps, and refer to the illustration on the next page.

a. Cut the DC output cord to the length needed.

b. Strip the jacket to expose 0.2 inches (5 mm) of the conductors.

c. Slide the leads into the supplied captive screw plug and lock them, using an Extron Tweeker (small screwdriver).

VersaTools® MDA EQ Series • Quick Start Guide QS-1