Extron electronic MMX 62, MMX 42 Remote Control, cont’d, Using the command/response table

Remote Control, cont’d

Using the command/response table

The command/response table begins on page 4-5.Either upper case or lower case letters are acceptable in the command field except where indicated for the audio level (gain and attenuation) commands. Symbols are used throughout the table to represent variables in the command/response fields. Command and response examples are shown throughout the table. The ASCII to HEX conversion table below is for use with the command/response table.

ASCII to HEX Conversion Table

Space

Symbol definitions

]= CR/LF (carriage return/line feed)

•	= space
X!	= Input
X@	= Input number (for tie)
X#	= Output number
X$	= Gain /attenuation value
X%	= Gain value (+dB)
X^	= Attenuation value (-dB)
X&	= On or off status
X*	= Software version

01 through maximum

00 through maximum (Input 0 = deselected output

01 or 02

-18 to +24 (43 steps)

Numeric value, 00 to 24 (default = 00) Numeric value, 00 to 18

0 (off) or 1 (on) x.xx

4-4 MMX 42/62 Series Matrix Switchers • Remote Control