Extron electronic MVX 48, MVX 88, MVX 44, MVX 84 manual Example 3 Remove a tie from a set of ties

Operation, cont’d

The current configuration (figure 3-12) is now:

•Input 5 video tied to output 1, output 3, output 4, and output 8

Input 5 video tied

to outputs 1, 3, 4, and 8.

Input 5 audio tied

to outputs 3, 4, and 8.

Input

5

1

3

4 Output

8 Video Audio

Figure 3-12 — Example 2 configuration

Example 3: Remove a tie from a set of ties

The following steps show an example in which an existing tie is removed from the current configuration. The example shows the front panel indications that result from your actions.

This example assumes that you have performed example 1 and example 2.

1. Select audio only for the tie (figure 3-13).

Press the button to cycle through the selections.

I/O

The video LED is off when video is deselected. VID

The audio LED lights when audio is selected. AUD

Figure 3-13 — Select audio only

2. Press and release the Input 5 button (figure 3-14).

Press and release the Input 5 button.

4	INPUTS			2		4	OUTPUTS
	5	6	1		3		5	6	7	8

The Input 5 LED lights to indicate that input 5 is selected.

The Output 3, Output 4, and Output 8 LEDs light to indicate the ties created in example 1.

Figure 3-14 — Select an input

3-10 MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation