Matrix Switchers Control Program
The Extron Matrix Switchers Control Program accompanies the MVX Series VGA switchers. The program, which communicates with the switcher via the
The program is compatible with Windows 95/98, Windows NT, Windows ME, Windows 2000, and Windows XP. Updates to this program can be downloaded from the Extron Web site (http://www.extron.com).
Installing the software
The program is contained on a set of
To install the program from the floppy disk to the hard drive, run Setup.exe from the floppy disk and follow the instructions that appear on the screen. The program occupies approximately 3 MB (megabytes) of
By default, the Windows installation creates a C:\MTRX50 directory and places two icons (Matrix Switcher+ Control Program and Matrix Switcher+ Help) into a group or folder named “Extron Electronics.”
The program was designed to control most Extron matrix switchers, but its operation is limited to the features and configuration of your MVX Series VGA switcher.
Using the software
Overview
1.To run the Matrix Switchers Control Program,
Matrix Switcher+ Control Program icon (shown at left) in the Extron Electronics group or folder.
The Comm Port Selection window (figure
Figure 4-6 — Comm port selection window
2. Choose either the comm port that is connected to the MVX switcher’s
Although IP [LAN] is available for selection, the switcher does not have an
Ethernet port. Do not select IP [LAN].