P/2 DA4xi and P/2 DA6xi, cont’d
To make input and output connections to other devices, do the following:
1.Turn off the PC and local monitor.
2.Connect the input cable of the P/2 distribution amplifier (DA) to the computer's
If you wish to send RGBHV, RGBS, RGBsB, RsGsBs, component video,
RGBHV |
|
|
|
|
|
| R | G | B | H | V |
RGBS |
|
|
|
|
|
| R | G | B | H | V |
RGsB, |
|
|
|
|
|
RsGsBs, |
|
|
|
|
|
Component | R | G | B | H | V |
| |||||
|
|
|
|
| |
| R | G | B | H | V |
Composite |
|
|
|
|
|
| R | G | B | H | V |
3.Connect the computer's monitor to the Local Monitor output of the DA.
4.Connect
5.Turn on the local monitor, other display devices, and the PC.
Extron
P/2 DA6xi
VGA Distribution
Amplifier
Video Gain
The Video Gain switch is located on the rear panel with a default setting of 0.7 V (down). Set the switch to 1 V when long cable runs affect the picture quality. This boosts the signal level to compensate for degradation due to cable length.
Signal Compatibility
Signal compatibility is affected by voltage. When the Video Gain switch is set to
•0.7 V (default) — the P/2 DA can pass all signal types
•1 V — the P/2 DA can only pass the RGBHV and RGBS video types.
Parts
Included parts
Included Parts | Replacement |
| part number |
|
|
12VDC, 1A external power supply | |
|
|
IEC power cord |
|
|
|
Rubber feet (4) |
|
|
|
P/2 DA4xi and P/2 DA6xi User’s Guide | |
|
|
Optional accessories
Accessories | Part number | |
1U | 6” Deep Rack Shelf Kit | |
|
|
|
1U | 6” Deep Basic Rack Shelf | |
1U | Universal Rack Shelf Kit | |
|
|
|
1U | Basic Rack Shelf | |
|
| |
|
| |
|
| |
VGAM MHR, Male to Male cable, 6' | ||
|
|
|
PC
Compatible Displays
6 | P/2 DA4xi/6xi • InstallationSpecifications | P/2 DA4xi/6xi • Installation | 7 |