Extron electronic P/2 DA12 Series Video Input and Output Connections, 5- Video Connections

Models: P/2 DA12 Series P/2 DA8

1 32
Download 32 pages 49.49 Kb
Page 19
Image 19
Video Input and Output Connections

Video Input and Output Connections

All models are able to accept RGBHV, RGBS, RGsB, RsGsBs, YUV (tri-level and bi-level sync), S-video and composite video, and resolutions from VGA (640 x 480) to QXGA (2048 x 1536). The signal is distributed without modification: the output format follows the input format.

To make input and output connections with other devices, follow these instructions:

1.

Turn off the power to the distribution amplifier and the

 

video source.

2.

Connect the video source to the 15-pin female HD input

 

socket on the rear panel of the distribution amplifier.

3.Connect the display devices to the 15-pin female HD output sockets on the rear panel of the distribution amplifier.

NID bits on pins 4, 11, 12, and 15 are routed to Output 1.

NFor optimal performance, all display devices should have similar resolution capabilities.

NFor sources and displays that require different connectors, use an HD adapter cable, such as the Extron SY BNCM series (#26-533-xx; see the figure below, at left). The BNC connectors used for different signal types are shown in the figure below, at right.

RGBHV

R G B H V

RGBS

R G B H V

RGsB,

 

 

 

 

RsGsBs,

 

 

 

 

Component

G

B

H

V

R

S-video

 

 

 

 

R

G

B

H

V

Composite

 

 

 

 

15-pin HD Connector

G

B

H

V

R

Figure 2-5 — Video Connections

 

 

 

 

P/2 DA8 and P/2 DA12 • Installation and Operation

 

2-9

Page 19
Image 19
Extron electronic P/2 DA12 Series, P/2 DA8 user manual Video Input and Output Connections, 5- Video Connections