Extron electronic Rack mounting, 10 PS 124 12 VDC, 4 Amp Power Supply Installation Manual

PS 124, cont’d

Rack mounting

For optional rack mounting, mount up to four PS 124 power supplies on an RSU 129 9.5" 1U Universal Rack Shelf (part

#60-190-01) (figure 8) or an RSB 129 9.5" 1U Basic Rack Shelf (part #60-604-01).

1U Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

1/4 Rack Width Front False

Faceplate

Both front false faceplates use 2 screws.

(2) 4-40 x 3/16" Screws

Use 2 mounting holes on opposite corners.

Figure 9 — Rack mounting the PS 124

1. If feet were previously installed on the bottom of the PS 124 unit, remove them.

2. Mount the PS 124 on the rack shelf, using two 4-40 x 3/16" screws in opposite (diagonal) corners.

3. If necessary, mount the half rack width false front panel (included with the Universal Rack Shelf only) and/or the quarter rack width false front panel (included with the PS 124) to the shelf, using two 4-40 x 3/16" screws in the front holes for each panel.

10 PS 124 12 VDC, 4 Amp Power Supply • Installation Manual