Extron electronic PS 124 installation manual Under-desk mounting the PS

Under-desk mounting

In addition to using the PS 124 power supply on a rack or projector, it can also be mounted under furniture (such as a desk) using the MBU 125 Under-Desk Mounting Kit (part

#70-077-01). To mount the PS 124 under a desk or other furniture, follow these steps:

1. Attach the mounting brackets to the power supply with the provided machine screws (figure 10).

2. Hold the power supply with the attached brackets against the underside of the furniture. Mark the location of the screw holes of the bracket on the mounting surface.

3. Drill 3/32" (2 mm) diameter pilot holes, 1/4" (6.3 mm) deep in the mounting surface at the marked screw locations.

4. Insert #8 wood screws into the four pilot holes. Tighten each screw into the mounting surface until just less than 1/4" of the screw head protrudes.

Figure 10 — Under-desk mounting the PS 124

5. Align the mounting screws with the slots in the brackets and place the power supply against the surface, with the screws through the bracket slots.

6. Slide the unit slightly forward or back, then tighten all four screws to secure it in place.

PS 124 12 VDC, 4 Amp Power Supply • Installation Manual 11