Extron electronic SI 28, SI 26 V-Lock Wall Mount Assembly Kit Installation, Hook this, side first

Lift the speaker up to the

wall mount assembly....

Box

Bracket

VLock Groove

...and slide it down into the V-lock groove.

Box

Bracket

V Lock

Groove

Figure 5 — Slide the speaker down onto the wall mount assembly

2.If re-installing two speakers, repeat all the installation and speaker mounting steps for the second speaker, then go to "Final adjustments" section on the following page.

Mounting the SI 28 speaker onto the wall mount assembly

1a. Carefully lift the speaker up as close to the bottom of the wall mount assembly as possible and hook the right outer edge of the speaker box bracket over the right inner edge of the V-lock groove (see figure 6).

NHolding the speaker so that the lowest part of the speaker is as close to the bottom of the V-lock groove as possible makes it easier to hook the two parts together.

V Lock Box

Groove Bracket

Lift the speaker to the wall mount assembly, keeping it as low as possible.

Top View

Step 1a

		Box
		Bracket
Hook this
side first.
V Lock	Swivel and	V Lock
Groove
	hook this	Groove
	side second.	Step 1b
	Box
	Bracket

Figure 6 — Hook the speaker over the edges of the V-lock groove on the wall mount assembly

1b. Rotate the speaker until the speaker box bracket left edge hooks over the left edge of the V-lock groove (see above).

1c. When the bracket is securely over the V-lock groove, gently slide the speaker down until it locks into place.

2.If re-installing two speakers, repeat all the installation and speaker mounting steps for the second speaker, then go to "Final adjustments" section on the following page.

V-Lock™Wall Mount Assembly Kit • Installation 4