Installation
Installing the SI 26 or SI 28 Speaker
The SI 26 or SI 28 can be mounted on a surface, such as a wall or post, or mounted in a bookcase, or under a shelf, and can be used with any Extron product with power amps.
Extron
SI 28
Figure 4 — Surface speaker application
Desk top or bookshelf applications
1. | For quick installation on a desk top or bookshelf, simply |
| place on a desk, shelf or other flat surfaces as desired. |
2. | Route the speaker wire (Extron recommends using |
| |
3. | Strip the wire and connect the speakers as described in |
| "Wiring the SI 26 and 28 speakers" on page 8. |
Wall mounting applications
Installing the wall mount assembly
NBefore starting installation ensure that the wall and wall material is capable of supporting the combined weight of the speakers and the wall mount assemblies.
1. | If mounting to drywall, use a stud locator to locate the |
| studs in the wall. Mark their position. |
2. | Remove the wall mount assembly from the box and |
| loosen the hex cap screw (turning it counter clockwise) |
| with the allen hex tool supplied. Rotate the front section |
| approximately 90 degrees to the rear mounting plate, as |
SI 26 and SI 28 Speakers • Installation | 3 |