Extron electronic SW6 Remote Control, cont’d, Using the command/response table, Response, Command

Remote Control, cont’d

Using the command/response table

The command/response table begins on the next page. Lower- case letters are acceptable in the command field except where indicated for the gain and attenuation commands. Symbols are used throughout the table to represent variables in the command/response fields. Command and response examples are shown throughout the table. The ASCII to HEX conversion table below is for use with the command/response table.

Symbol definitions

] = CR/LF (carriage return/line feed) (0x0D 0A)

•= space

X!	=	Input number	0 through 6 (0 = output mute)
X@	=	Switch mode	1	= auto switch mode
			2	= normal switch mode
X#	=	Audio level	0	- 15
X$	=	Gain or attenuation	-15 through +9
			(dBs of gain or attenuation)
X%	=	Switch mode	1	= normal switch mode
			2	= auto switch mode

X^	= Firmware version	n.nn
	ASCII to HEX Conversion Table
		•

Command/response table for SIS commands

Additional description
Response	(unit to host)
ASCII Command	(host to unit)

Command

		breakaway).	breakaway).
X!as output.	6 as output.	X!video as output (audio	X!audio as output (audio
Select input	Select input	Select input	Select input

CX!] C6] VX!] AX!]

X!!	6! X!& X!$
Switching commands Select video and audio input	Example: Select video input Select audio input

Switcher automatically selects the highest numbered input with a signal present. Front panel and RS-232 input selection are blocked. Switcher responds to front panel/RS-232 input selection.

F1] F2]

#1	#2
Switch mode Set auto switch mode	Set manual switch mode

N The set gain (G) and set attenuation (g) commands are case sensitive. The show audio level command is not case sensitive.

Input audio level

of gain.	gain.	of attenuation.	or attenuation.
X!audio level to X$dB	1 audio level to +6 dB of	X!audio level to X$dB	audio level is X$of gain
Set input	Set input	Set input	Input X!
InX!•Aud=X$]	In1•Aud=+6]	InX!•Aud=X$]	InX!•Aud=X$]

X!*X#G	3*6 X!*X#g VX!G
Set input gain	Example: Set input attenuation	Show input audio level

and mode. "M" is the total	for this product.
VX!•AX!•FX%•QVERX^•M6] Show system configuration	number of inputs, always 6	N60-260-01] X^]

I	N Q
Information requests Information request	Request part number	Query firmware version

3-4 SW6 VGA Audio • Remote Control

SW6 VGA Audio • Remote Control 3-5