![](/images/new-backgrounds/1106671/10667121x1.webp)
Making Connections to and Operating the VSC 100 • Chapter 2
Signal Lock LED – Off = no signal; Blinking = signal is out of range; On = signal is within range.
Troubleshooting Tips
No image or picture –
1.Make sure all cable connections are correct and tight.
2.Confirm that only compatible scan rates are coming into the VSC 100.
Picture too bright –
1. Set 75 Ohm DIP switch (rear) to the 75 Ohm position (up).
Picture too dark –
1.Set 75 Ohm DIP switch (rear) to the off position (down).
2.Disconnect any output cables that are not being used. (Do not have cables connected to both
No color on display screen –
1.Adjust the hue/tint and color controls on the display device.
2.Be sure to use video equipment that matches the format (NTSC, PAL etc.).
Poor recording quality –
1.Adjust the sharpness control on the VCR.
2.Record using the
VSC 100 • User’s Manual • Extron |