Extron electronic YCS SW2 Installation and Operation, cont’d, Back of the rack mounting

Installation and Operation, cont’d

Back of the rack mounting

1U Universal Rack Shelf

Both front false faceplates use 2 screws.

Use 2 mounting holes on opposite corners.

1/2 Rack Width Front False Faceplate

1/4 Rack Width Front False Faceplate

(2) 4-40 x 3/16" Screws

The YCS SW2 also can be mounted vertically to the front or rear rack supports, using the optional back of the rack mounting kit (Extron part #70-367-01).

Follow these steps to mount the YCS to the rack supports using the back of the rack mounting kit:

1.	If feet were previously attached to the bottom of the YCS,
	remove them.
2.	Remove the two screws from one side of the YCS. Retain
	the screws for possible later reassembly.
3.	Attach one bracket to the side of the unit, using the longer
	screws included in the mounting kit (see figure 2-4, below).
4.	Repeat steps 2 and 3 on the other side of the YCS.

Figure 2-2 — Mounting a YCS SW2 on a standard rack shelf

6" Deep Rack Shelf	1/2 Rack Width Front False
	Faceplate

Front false faceplate uses 2 screws.

(2) 4-40 x 3/16" Screws

Use 2 mounting holes on opposite corners.

Figure 2-3 — Mounting a YCS on a 6-inch rack shelf

Figure 2-4 — Attaching the back of rack mounting brackets to the YCS SW2

5. Mount the unit to the rack support, using the two included rack screws.

2-4 YCS SW2 • Installation and Operation YCS SW2 • Installation and Operation 2-5