SSM
This command allows you to set the Sync mode. When selecting the option you need, enter the appropriate single digit number, and then hit enter.
Value Function
The camera returns …………..…..1 Free run
2External Sync
3External Sync, fixed integration
4External Sync, electronic shutter
SCM
This command allows you to select a correction mode. When selecting the option you need, enter the appropriate single digit number and then hit enter.
Value Function
The camera returns……………….1 M1 (1st memory)
2M2 (2nd memory)
3Offset Correction
4Gain Correction
5No Correction
6Full Correction
STP
This command allows you to select a test pattern. When selecting the option you need, enter the appropriate single digit number, and then hit enter.
Value Function
No output from camera…………1 Horizontal Ramp
2Vertical Ramp
3Vertical Bars
4Vertical Ramp and Bars
50
64095
Other Video
CBR
This command allows you to change the Baud Rate. You will not see anything on your monitor.
Here is a table of stored rates in the camera…Value | Function |
1 | 9600 |
2 | 19200 |
3 | 38400 (Default) |
4 | 57600 |
5 | 115200 |
If you can’t resist changing the baud rate, select the appropriate single digit number and hit enter.
Fairchild Imaging •
