LED
This command allows you to change the color. When selecting the option you need to, enter the appropriate single digit number and hit enter. Your screen will be blank during this command
You can input one of the following:
Value | Function |
0 | Amber |
1 | Green |
2 | Red |
3 | Off |
GDA
This command allows you to show all of the DACs (Digital to Analog Converter). When selecting the option you need, enter the appropriate single digit number and hit enter.
The camera returns… |
|
3:Gain F_odd = 0.490V | 8:GainF_even = 0.490V |
2:GainC_odd = 0.235V | 6:GainC_even = 0.235V |
4:Offset_odd = 1.199V | 7:Offset_even = 1.199 |
1:CML_odd = 1.425V | 5:CML_even = 1.425 |
SDN
This command allows you to select one of the above DAC numbers, and change its value.
Example: SDN + enter + 486 + enter | enter value between 0 - 1023 |
GDN
This command allows you to verify what you just did under the SDN command. Example: you would input the following GDN + enter + 1
The camera returns a value between 0 - 1023
SAP
Store in Flash both correction memories, all registers and DAC values.
| Value | Function |
Store all parameters | 0 | Default factory calibrate |
| 1 | User |
| 2 | User |
RAP
Load from flash to camera. Recall all parameters.
Value Function
0Default factory calibration
1User
2User
Fairchild Imaging •
