FM VERSION DESCRIPTION | ENG | |
|
|
|
11.11 THE MENU TREE
The menu tree for the Falcon 15 MPX Version is shown on here below. It has all of the possible main menu items listed along the left side.
The branching
The diagram here below displays the complete Falcon 15 menu – please refer to the table on Cap. 2 for Optional feature list.
MAIN PAGE (Preset, Agc level, Compressor levels, Input Meters) |
Input Setup
Mpx Module Setup
Sensibilty
AGC Speed
AGC Mode
Input Source
Pilot Level
Pilot Phase
Preemphasis Output (Mpx) Level Output Mode Mpx mode Output Sync Noise Gate
-12 dBm to+ 12 dBm (1 dB step)
0 to 6 dB/sec (0.2 dB step) Hold=0 sec & MaxG= 08 dB; Hold=1 sec & MaxG= 10 dB; Hold=0 sec & MaxG= 12 dB; Hold=2 sec & MaxG= 12 dB; Hold=3 sec & MaxG= 15 dB; Hold=3 sec & MaxG= 20 dB; Hold=0 sec & MaxG= 15 dB; Hold=0 sec & MaxG= 20 dB; Analogic / Digital input
Off / - 25 dB to – 15.5 dB (0.1 dB step)
-12 Deg to + 12 Deg (1 Deg step)
50 uSec / 75 uSec (Internal)
-9.0 dB to + 15 dB (0.1 dB step)
Normal / Peak Ref Tone / Split mode / Bypass Normal (Stereo) / Mono (Left Input) / Mono (L+R) Output Sync Disabled / Enabled
Off, - 80 dB to – 51 dB (1 dB step)
Rds Setup | ||
|
| |
|
| |
Serials Setup | ||
|
| |
System Information | ||
|
| |
|
| |
|
|
Rds Encoder | Rds Encoder Off / Rds Encoder On | ||
Rds Level |
| - 44.0 dB to – 20.0 dB (0.1 dB step) | |
Rds On Split | Rds Encoder Off / Rds Encoder On | ||
Serial Port 1 | Serial Disabled / Serial Enabled | ||
Serial Port 2 | Serial Disabled / Serial Enabled | ||
Temperature |
|
| |
External Inputs | Bit M/S On (1) / Off (0); bit TA On (1) / Off (0); Split On | ||
(1) / Off (0) | |||
|
| ||
Firmware Version |
|
| |
Firmware Code |
|
|
Page 24
