HARDWARE SETTINGS | ENG | |
|
|
|
19 HARDWARE SETTINGS
19.1CHANGING THE INPUT AUDIO IMPEDANCE (FM VERSION)
The analog input impedance may be set to 600Ohm, rather than 10kOhm, by moving the two jumpers JP1 and JP2 on the analog input board (see figure below).
19.2CHANGING THE INPUT AUDIO IMPEDANCE (ST VERSION)
The analog input impedance may be set to 600Ohm, rather than 10kOhm, by moving the two jumpers J6 and J7 on the analog input board (see figure below) to the
Page 68
