Falcon 15 manual IN / OUT SETTINGS ST version, Mono - Stereo Operation

IN / OUT SETTINGS (ST version) ENG

14.3.4 MONO - STEREO OPERATION

The Audio Module Setup / Process Mode menu selects the mono versus stereo operation of the audio output.

In particular:

-Selecting Mono (Left) the Left input channel only will be processed and output on both the L and R outputs.

-Selecting Mono (Left+Right) the sum of the left and right audio inputs will be processed and output on both the L and R outputs.

14.3.5NOISE GATE SETTING (Noise Gate)

The Audio Module Setup / Noise Gate function allows you to avoid the effects of background noises while the input signal presents a lack of high frequencies. The parameter to be set is the Noise Gate Threshold, which determines the threshold value below which the dynamic pre-emphasis is automatically excluded.

The Noise Gate Threshold: This may be adjusted within a range of –80 to –51dB (1 dB steps).

The Noise Gate function can be turned off if necessary by turning the shuttle counter-clockwise to the Off position.

Page 47